2020 Apex SC Series Single Arm Full Servo Robot - SC 3000 (New)
Apex SC 3000
Age: 2020
Stock Number: 3560
Refurbished - new pendant -
Click to view larger photo
Specification | Description |
Product Arm Strokes | |
Vertical Arm Stroke (AC Servo) | 118.10" (3000 mm) |
Strip Stroke (AC Servo) | 77.55" (1970 MM) |
Traverse Stroke (AC Servo) | 196.84" (5000 mm) |
Payload | 110 lbs |
Suitable machine size | 1500 - 2500 |
Voltage | 200V AC Single Phase |
Shipping Dimensions | To advise |
Equipped With:
Standard 14 spare inputs and 12 spare outputs for interfacing with other ancillary equipment. Extension up to 30 I/O also available. .
1. Parts removal :
a) 3 Axis synchronised movements reduce complexity and cost to build end-arm-tooling.
b) Able to reach parts with hooks and undercuts using unconventional paths such as curves, etc.
2. Stack and array:
Each cycle can handle up to 9 stack areas with individual stack formats. Can also place parts onto 100 points on the same surface.
3. Insert and grid:
Each cycle can place 9 different insertion materials into the mould, fed from a single point, grid pallet, or multi-station.
4.Inspection :
a) Reject program: Detects signal from the moulding machine and places part in different area.
b) Inspection program: Places part in different area for QC inspection, for example every 100 cycles.
c) Test-Mold program: Allows checking of parts at the beginning of each automatic moulding cycle before cycle counter starts.
d) Weight program: Checks part quality from electronic weight scale and separates defect parts.
e) Cycle counter: Counts the total number of moulding cycles. Inspection cycle and defect parts are not included in count total.
25422 Trabuco Road, Ste 105 - 531
Lake Forest, CA 92630-2796
Phone: 949-756-8387
Fax: 949-263-1087
sales@pmexchange.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com