2019 Engel 720 Ton 45 Oz Electric with CC 300 -e-speed 720/90 US
Engel e-speed 720/90 US
Age: 2019
Stock Number: 4147
Click to view larger photo
Request a quote on stock# 4147
| Specification | Description |
|---|
| Clamp Force: | 720 US Ton |
| Shot Size: | 45 Oz/90 mm |
| Injection Rate: | |
| Max Injection Pressure: | 29,000 PSI |
| Screw Stroke: | 10.6" |
| Tie Bar Spacing: | 41.3" x 41.3" |
| Platen Size: | 60.24" x 60.24" |
| Max Daylight: | 70.9" |
| Min/Max Mold Ht: | 55.1" - 70.9" |
| Clamp Stroke: | 39.4" |
| Ejector Stroke: | 10.6" |
| Voltage: | 460 |
| Dimensions Clamp: | |
| Dimensions: Inj Unit: | 67" x 91" x 94" |
| Weight Clamp: | 82,600 lbs |
| Weight Inj Unit: | 22,400 lbs |
Equipped With:
CC 300 Closed Loop Control
Hi Speed Clamp & Injection Unit
Electric Screw Drive
Coining
Set Up to Accomodate Stack Mold
Double Hydraulic Core Pull on Stationary Platen
Double Pneumatic Core Pull on Stationary Platen
Double Hydraulic Core Pull on Moving Platen
Double Pneumatic Core Pull on Moving Platen
Dual Air Blow
20 Mold Heat Zones
4 Pneumatic Valve Gates
Swiveling Inj Unit
M3 Bimatellic Barrel
S13 Barrier Screw 25:1 L/D
Pneumatic Shut-Off Nozzle
Ceramic Heater Bands with Barrel Insulation
Increased Capacity Heat Exchanger
Central Lube on Toggle
Ejector Back Confirmation
3 Sets Bearings for Mold Support
25422 Trabuco Road, Ste 105 - 531
Lake Forest, CA 92630-2796
Phone: 949-756-8387
sales@pmexchange.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
